Hud-Son
Forest Equipment, Inc.
Our
Portable Sawmill Is Second To None!
Portable Sawmills, Bandmills, Sawmilling Equipment - Hud-Son
-
We build & sell portable sawmills, wood processing equipment and many
other wood products. SAWMILL IS OUR
MIDDLE NAME - 1-800-765-7297 |
 |
Farmi
JL351 PHD
Skid
Steer Winch
The Farmi JL351PHD winch hooks up to the universal type quick attach skid steer
plates. The winch is powered by oil flow from the skid steer. The winch is
supplied with hoses which hook up to the skid steer. The hoses have pipe thread
and do not have quick couplers to match the quick couplers on the skid steer.
(Too many different standards out there.) The operator operates the winch not
from the skid steer loader’s seat but from a safe position on the side of the
winch. The winch has two control ropes. One rope controls the pulling and the
other controls the drum brake. The operator can stand safely to the side, away
from the cable and the logs. The operator engages the clutch by pulling the
control rope. The harder one pulls on the rope, the more the winch pulls.
One can start and stop the pull at any time. The clutch control rope runs
through a
swivel on top of the winch.
The winch can therefore be operated from any direction. This is an
important feature for the operator as he can move to either side and
control the winch from a position from where he can see the load as he
is pulling it in. The clutch enables the operator to select any pull
from zero to maximum pull of the winch. The clutch will slip when the
load is heavier than the selected pull. This prevents damage
to the cable or winch even if the load gets hooked behind a stump or
root. |
 |
|
Model |
Description |
Weight |
Price |
|
JL 351 PHD |
Hydraulic Winch w/ skid steer
mounting plate |
750 lb |
$6,975 |
|
|
The clutch
has a 5 year warranty.
A new clutch can be riveted on the on the old
sprocket so the clutch is easy and inexpensive to replace. The massive upper sprocket acts
as a heat sink and absorbs the heat which is generated in the clutch when winching, so the
clutch will not burn out.
The winch frame is high. The high point of pull is
very beneficial, because it generates down-pressure on the winch when winching. The
down-pressure pushes the blade into the ground which anchors the winch and skid steer in
place. Four trees can be winched in one hitch. After the trees are winched in, one can
pull them around by slipping the cable under the lower snatchblock.
Clutch adjustment, brake adjustment, replacing the
cable and all other service can be done without any disassembly of the winch. Repair of
the winch is also very easy because the entire winch mechanism can
be removed in one piece after removal of six (easy to get to) bolts.
The winch has a built in dozerblade.
The blade can be used to stack logs on the landing, open trails, clear snow.
|
| Pulling capacity 7720 lbs |
| Drum capacity: 180 feet of 3/8" cable |
| Winching speed: 40-200 feet per minute. |
| Clutch: Mechanical friction plate clutch with heat
sink. |
| Oil flow required: 15 gpm @ 2000 psi |
| Mounting: To skid steer loader quick attachment plate. |
| The winches are sold complete with 165' of 3/8"
steel core wire rope. |
| Height with screen: 77 ½" |
| Width: 48" |
| Shipping weight: 750 lbs |
|
