|
Ease of Operation
The low feeding point ensures
effortless feeding of the
chipper. The operator can stand with a
straight back. The chipper stands by itself
on the ground and is easy to hook up or
remove from the tractor.
Safety Features
The VALBY chippers do not have
any knife motion toward the operator. This
reduces risk of material flying back through
the feed chute. To accomplish safe operation
in various wind directions, the VALBY
chipper's discharge direction is adjustable
360 degrees. An adjustable deflector bonnet
enables placing the chips near or far. The
chipper feeds the material smoothly and
does not jerk
it from the
operator's hands. The knives are counter
sunk into the disk for safety.
Ease of Service
The upper-housing of the chipper
folds up for easy access to the knives. The
knives can be sharpened about 50 times
before replacement. The changing of the
knives takes about 10 minutes. The knives
are easy to get to, and no special tools are
needed for the change.
Feed Chutes
The feed chutes of the chipper
are on a hinge, so the chute can be folded
to the side for access to the anvil and
knives. The feed chutes are also detachable |
