|
Hud-Son
Forest Equipment, Inc.
Our
Portable Sawmill Is Second To None!
Portable Sawmills, Bandmills, Sawmilling
Equipment - Hud-Son - We build & sell portable sawmills,
wood processing equipment and many other wood
products. SAWMILL IS
OUR MIDDLE NAME - 1-800-765-7297 |
 |
|
1) SKIDDING CHAINS
Pulling out the winch cable and carrying the chains to
the felled trees has typically been the heaviest part of a skidder
operation. The unique Farmi sensor and brake system has made the pulling
out of the cable very easy. The Farmi skidding chains are lightweight but
strong as they are made of top quality materials such as boron steel. A
timesaving primer pin is fastened to the chains. This primer pin makes it
easier to pass the chain underneath a felled tree. The pin is first pushed
underneath the tree and then the chain is pulled through from the pin.
|
 |
JK 208 Boron steel skidding
chain assembly, 9" long primer pin, 68" long chain with choker hook.
Breaking strength 10,200 lbs. For use on Farmi JL290, JL351 models.
Weight: 4.5 lbs. $29.00 JK 249
Skidding chain assembly 5/16", 9" long primer pin, 80" long chain with
choker hook. Breaking strength 18,800 lbs. For use on all Farmi
models. Weight 8lbs. $38.00
JK 300H Skidding chain assembly 5/16", 9"
long primer pin, 8' long chain with choker hook. Breaking strength
18,800 lbs. For use on all Farmi models. Weight: 9lbs.
$41.00
JK 800 Skidding chain assembly 3/8".
Grade 800 alloy chain, 8' long with choker hook. Breaking strength:
28,200 lbs. For use on skidders and Farmi JL601, JL60T, and
JL2/601 winch models. Weight: 15 lbs. $70.50 |
|
 |
2) CHOKER HOOKS
The H7 choker hook fits 1/4" chain.
$9.50
The H8 choker hook fits 5/16" chain.
$13.25
The H10 choker hook fits 3/8" chain.
$17.25 |
 |
3) FARMI
SELF-RELEASING SNATCHBLOCK TP14
- $305
When obstacles prevent direct winching, or
when the remaining trees are to be protected from damage, a
self-releasing snatchblock should be used. The Farmi snatchblock
releases the cable when the keyhole slider reaches it. The snatchblock
is attached to an anchor tree with a nylon strap which prevents damage
to the tree. The automatic cable release works only when the pulley is
turned upside down, which is when the release mechanism is facing the
ground. The self-releasing snatchblock can be used with 9/16" and
smaller cable.
click here for
photo |
 |
4) FARMI KEYHOLE
SLIDERS LL2 & LL6
The Farmi keyhole sliders are used with the
Farmi skidding chains. The JL60T, JL601, and JL2/601 have LL6 keyhole
sliders. All other models have LL2 keyhole sliders.
The LL2 size is used for cable up to 1/2"
and skidding chains up to 5/16".
$18.50
The LL6 size is used for cable up to 3/4"
and skidding chains from 5/16" to 7/16".
$43.25 |
|
5)
Replacement Cables For Farmi Winches
A flexible steel core
wire rope is the best replacement cable for the Farmi winches.
V10
The V10 cable is a 3/8" diameter 6 x 25 IWRC type with
a breaking strength of approximately 13,110 lbs., The cable is 165 feet
long. It is used as a replacement in the following Farmi winch models: JL
20, JL 25, JL 30, JL 250, JL 256, JL 290, JL 300, JL 303, JL 306, JL 351, JL
400.
V12-145 and V12-165
The V12 cables have a 1/2" diameter and are of 6 x 25
IWRC type. The breaking strength is approximately 23,000 lbs. The cable is
available in 145' and 165' lengths. This cable is used in the following
Farmi winch models: JL 45, JL 453, JL 456, JL 50, JL 500, JL 501.
V14
The V 14 cable has a diameter of 9/16". It is of 6 x
25 IWRC type. The breaking strength is approximately 29,000 lbs. The cable
is 165' long. It is used as a replacement in the following Farmi winch
models: JL 60T, JL 600, JL 601.
6) LK2 Hook for the end of the
cable.
|
 |
7) A
protective screen which bolts on to the winch is available for all
current Farmi winches. The protective screen is necessary if the
operator is sitting on the tractor when winching. The screen protects
the operator from injury which could be caused by a breaking cable or
skidding chain. The protective screen does
not provide roll-over protection. |
|
Winch Accessory Pricing |
| Note: The Frami Accesories are
interchangeable between the different models. The accessories
marked with an * can be used at full pull only on the JL290, JL351 and
JL351P Winches |
| Part # |
Description |
Weight |
Price |
| JK208* |
Skidding Chain 1/4", 68" long with 9"
pin, ultimate breaking strength: 10,000 lb |
4.5 lb |
$29.00 |
| JK249H |
Skidding chain 5/16", 80" long with 9"
pin, ultimate breaking strength: 18,800 lb |
8 lb |
$38.00 |
| JK300H |
Skidding Chain 5/16", 96" long with
choker hook, breaking strength: 18,800 lb |
9 lb |
$41.00 |
| JK800 |
3/8" skidding chain, 8" long for skidders
and JL 601 Farmi winches, breaking strength: 28,200 lb |
14 lb |
$70.50 |
| H7 |
Choker hook for 1/4" chain |
11 oz |
$9.50 |
| H8 |
Choker hook for 5/16" chain |
14 oz |
$13.25 |
| H10 |
Choker hook for 3/8" chain |
1.5 lb |
$17.25 |
| TP14 |
Snatchblock, self releasing for 3/8" to
9/16" winch cable |
12 lb |
$305.00 |
| LL2 |
Keyhole Slider for 1/4"-5/16" chain
(JL351-501) |
7 lb |
$18.50 |
| LL6 |
Keyhole Slider, extra heavy up to 1"
cable 3/8" chain (JL601) |
3 lb |
$43.25 |
| LK2 |
Hook for end of cable |
7 lb |
$23.50 |
| NK45 |
Remote control reel |
6.5 lb |
$370.00 |
| V8 |
Winch Cable 165' long, 5/16" diameter |
39 lb |
$136.50 |
| V10 |
Winch Cable 165' long, 3/8" diameter |
47 lb |
$200.00 |
| V12-165 |
Winch Cable 165' long, 1/2" diameter |
80 lb |
$263.00 |
| V14 |
Winch Cable 165' long, 9/15" diameter |
98 lb |
$305.00 |
| SV350T |
Protective screen for JL351 & 351P (not
ROPS) |
14 lb |
$255.00 |
| SV600 |
Protective screen for JL400, 501 & 601
(not ROPS) |
30 lb |
$305.00 |
|
|