Hunter, Sawyer, Patriot, HFE-21, Oscar 221, 228, 328,428:
Blade Size: 132″ x 1 1/4 .035  SINGLE or CASE
H360, Farmboss 36, Oscar-336, 330, 236, HFE-30, HFE-36:
Blade Size: 167″ x 1 1/4 .042
Oscar 52:
Blade Size: 221″ x 1 1/2 .042

For More Blades please refer to our Blade Guide.

Please refer to your engine owner’s manual to see what the manufacturer specifies for that particular engine

Possible reason 1:
After you make your initial cut on log roll it up against the squaring post, you may have not had it aligned properly. This will cause a cant to be out of square.
Possible reason 2:
If you apply massive pressure when clamping cant it can sometimes cause the cant to “tilt” and this will cause it to be out of square.
Possible reason 3:
If you apply too little pressure when clamping cant it can allow can to move while cutting and this be out of square.

Possible blade dull, wrong tension, pitch build-up on blade, feeding too fast.

Please refer to the sawmill owner’s manual to see proper  procedure for adjusting guides.

Yes with a semi automatic band blade sharpener. It will keep your blades in top condition while enhancing your bandmill efficiency and reducing operating costs.